2-1 LBN in the satellite receiver?

I have two plates towards each other towards Astra and Hot Bird. At the moment I have to screw, one or the other antenna cables then change the satellite with the green) button (. Question: How do I have to change the physical Sat (with green button) could simply splicing the two wires with electrical tape, then plug it into my LBN / in on my receiver … or something that would f *** up? I know I could buy a Diseqc and do it properly, but for now all I can afford is electrical tape and a little antenna cable !!!!! I have a XTSC-520 Xtreme Satellite and Terrestrial receptor *

receiver actually changes the tension on the Sat cable when you are changing channels. If you connect the two wires together that wouldnt be good I guess:) What is suggested if you can not spend on a DiSEqC to try to get a splitter with a switch built in. You can connect up to two antennas for his two entries and connect its output of a receiver and then change the plates with a switch on it. I'm not sure this device there, but I suppose to work in theory. If there intend or can not afford to build one. A few connectors, some cables, a switch and some welding .. Shouldn't cost more than a few scarves Maplin.

www.galaxy-marketing.com Fortec Star DiSEqC HH Satellite Motor | Automatic Motorized FTA Free To Air Satellite Dish System for Ku Band

DiSEqC Satellite Switch 4x1 2.0 FTA Receiver Dish LNB $0.78 4x1 DISEqC Switch Ver:2.0, Frequency Range : 900-2400MHz, Insertion Loss : ?-3dB, Max. DC Current: 0.5A, In/Out Impedance: 75 ohm, Connectors: F Female, Isolation: ?-23dB...

Traxis DBS 3500 FTA Receiver $79.89 Traxis 3500 DBS FTA Receiver w/ Blind Search * Blind Search * Fully MPEG2 DVB Compliant * Free converting between PAL source and NTSC display * User programmable various satellite and transponder information * Stores up to 100 satellites/4,000 channels * EPG: Display of title and information up to 16 days events * Easy and fast software upgrade through RS232 port * Multi LNBF control by DiS...

Diseqc H-H Satellite Dish Motor SG6000 $44.90 Detailed Product Description Communication protocol DiSEqC 1.2/1.3 Level Maximum dish diameter 120cm Diameter of support pole (35 to 68)mm Dish support length 145 mm Dish support diameter 42 mm Rotation angle 70 Rotation speed 2.4/s(18V) 1.5/s(13V) Operating power supply 13/18 V DC Consumption in stand-by mode 40 mA Consumption in operating mode 180 mA Starting movement consumption (Max...