How I can display an image (image) on multiple television screens?

I recently purchased a large box of CATV cable, terminals, tools, and distribution amplifiers in an auction, so I decided to experiment. I ran cable through my house, with amplifiers, each one of my 4 TVs. The signal, however, comes from the one in my bedroom, which is the only one that has a significant amount of video equipment connected to it. At the root end of the cable, put an RF modulator with a composite video input and S-video. I tested my system by connecting a VCR / DVD player to the composite video input. The signal appears and sounds great on every TV. Is there a way I can make an image appear on every TV screen? My player DVD does not have photo capabilities and I wanted a relatively high quality image. I have it on my computer, is a resolution of 1024×768. Is there any way that I can show with a composite or S-video, so you can see all of my TV at the same time?

Not that comes to mind without having to buy elsewhere. If your computer happens to have a composite video out, connect the modulator. I suppose you have done this … You could get a converter to adapt the output of the team composite video. probably cost about $ 100 to $ 200. There are a number of new topics (AV receiver, TV, TIVO, etc) coming to market, allowing images to be pulled from a team if they are connected to the same Ethernet. You can find an affordable piece that has this feature. Or maye just get a new DVD player that plays a disk image. Probably the least expensive option. Good luck!

JLX750 AMPLIFIER www.eltigre-catv.com

Leviton 47690-8C2 1X8 Passive Video Splitter Module, White $29.26 1X8 Passive Video Splitter, 2 GHz for LIN Integrated Network, Structured Media, Video Distribution, UPC: 07847705848...

Leviton 48210-VA Amplifier Module $27.48 Leviton 014-48210-VA 1-way Video Amplifier Module, 50-1000 MHz Leviton 014-48210-VA 1-way Video Amplifier Module, 50-1000 MHz Features: Run cable TV or other video signals through the Video Amplifier before splitting and distributing throughout the home or office Boost signal strength by up to 25dB. Type: Video Amplifier Frequency Range: 50-1000 MHz Impedance: 75 Ohm Power Supply: 12VDC 500mA Colo...

10DB Vhf/catv Signal Amplifier $13.99 10dB UL Listed VHF/CATV 4-Output Signal Amplifier...

8-Port Bi-Directional Cable TV HDTV Amplifier Splitter Signal Booster with Pa... $27.94 This amplifier provides 8 ports for multiple TV sets, cable boxes, or cable modems. It boosts signal strength by more than double (+4dB), Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! This amplifier provides the exact same OR BETTER specs as the ones that other sellers are selling for much higher prices. PCT amplifiers are designed to fit into smaller ...

Motorola Signal Booster 484095-001-00 Bi-Directional RF Amplifier $34.99 Motorola 484095-001-00 RF Amplifier 484095-001-00 718...

F Type 75 Ohm Terminator, Pkg/10 $0.95 "Also known as Dummy Loads, terminators are an essential component in the proper termination of unused outputs of line splitters and amplifiers which utilize a Type F interface. Available in packages of 10 pieces. This is L-com part number BTF75M."...

Channel Master Distribution Amplifier 8-Way 4 DB 50-1000 MHZ Professional Grade Performance $44.95 Channel Master by PCT multimedia RF amplifiers and splitters are commercial grade, and can be used in HDTV, CATV, off-air, analog, and digital RF distribution applications where performance and reliability are required. Gain: 8 dB. Operating frequency: 50...

TII 212 Broadband Cable TV Lightning Surge Protector $11.97 If you want to protect your expensive home theater from lightning and other outside surges that come over the cable TV line, then this is what you need. TIIs cutting edge In-Line® Coaxial Lightning Surge Protectors protect personnel and customer equipment, e.g. Televisions, Cable Set Top Boxes and Cable Modems from lightning and power induced surges on coaxial cables. It is specifically designed ...

Electroline EDA-FT 08300 8-port TV Signal Booster/Amplifier with Active Return Path $89.99 The EDA-FT 08300 Flat-Top amplifier is designed to amplify an incoming analog or digital off-air signal, as well as CATV signal by 3 dB over 8 ports; 0 dB return loss means that each room of a house can use interactive CATV programs....

Channel Plus DA-500A 18 dB RF Amplifier $42.25 Channel Plus DA-500A 18dB RF Amplifier...