can not receive two signals in the sky +?
I'm moving the location of my Sky + box, and FT125 have 2 cables running in the new location. I connected the two cables from the dish LNB sat down to these two wires and cables to connect the Sky + box. Working Heaven, but I only get a sign in the box (facing the test signal in the sky + management menu) – 20db boosters I posted on each wire to try to boost the signal strength to see if that helps. Ensures that I have a 100% signal, but still, I have a second signal to register. I say there are about 35-40 meters of cable that runs in total. Really stuck – any ideas from what I can do to work sky +? I should also add that in the other room that had the same setup and it worked, the only difference is the length of cable as far as I can tell you: (… any ideas?
"I can take it that you are using 2 x F-connector adapter female female and two racing co-ax to the new location. The first thing that comes to mind is F connectors that can be part of the outer conductor touching the inner core verification it is enough core driver of the F connector protruding approximately 3 mm by the end of the plug to change the female-female adapters (I had a duff), if I otherwise I'll post again
DIRECTV Ka Ku 5 LNB Satellite Dish Installation Part 4
|
|
Cables To Go 41061 Satellite Signal Meter
$21.14 This is a highly sensitive signal level meter for satellite installation and alignment. A built-in signal level meter will give a quick indication of the signal strength from the satellite through the LNB. No external power is required; the satellite receiver powers the meter through the coax cable.... |
|
|
Cables To Go 41009 Satellite Signal Meter with LED Display
$25.23 This is a highly sensitive signal level meter for satellite installation and alignment. A built-in tone generator will give an audible indication of the signal strength from the satellite through the LNB. An LED bar graph gives a quick and reliable indication of the signal level. No external power is required; the satellite receiver powers the meter through the coax cable.... |
|
|
Steren Skytracker Pro for Dual-LNB
$116.03 Powered by receiver or internal battery. Optional accessories kit (203-635).... |
|
|
Satellite Finder Meter For Directv
$3.24 With the Satellite Finder, locking on to your satellite signal is now a one person operation. The Satellite Finder will align your satellite dish whether you use Dish Network, Direct TV, or any other type of satellite tv. Did you know DirecTV, Dish Network, and other satellite providers will charge you over $100 to come out and re-align your satellite dish? Our Satellite Finder will save you tons ... |
|
|
DIRECTV AU9-SL3-SWM Three LNB Ka/Ku Slim Line Dish Antenna SL-3 LNB Combo
$63.49 This is a new dish from DIRECTV with three LNBs to receive 99°, 101°, 103° satellites. This dish operates with the new MPEG4 H20 HDTV receiver (where local HD programming is available). Reflector size: 22.5" x 32.5" Use it for HD local channel programming from DIRECTV Built-in 8-channel multi-switch which allows you to connect multiple receivers at once. includes required 21v Power Insert-er. A... |
|
|
Dish Network 1000.2 Dish 110, 119, 129 Satellites High Definition Dish
$55.50 The perfect 1 dish solution for the customer who needs high definition reception. Works great with the VIP211, VIP624, VIP622 and the VIP 722 High Definition Receivers.... |
|
|
Eagle Aspen Satellite Meter
$17.99 Digital satellite finder with audio tone; freq resp: 950 MHz 2050 MHz; utilizes power from receiver; Backlit... |
|
|
TEST-UM CS300 Satellite Signal-Strength Meter
$29.46 USED TO MAXIMIZE A SATELLITE SIGNAL BETWEENTHE LNB AMPLI?ER & THE RECEIVER PERFECT FOR INSTALLING & SETTING UP DIRECT SATELLITE SYSTEMS PACKAGED IN A CLEAR-VIEW HANG-UP CLAMSHELL RUGGED ABS BODY EASY-TO-READ ANALOG DISPLAY FREQ RANGE: 950 MHZ 2050 MHZ VARIABLE ATTENUATOR FOR ULTRA-?NE TUNING CAPABILITY POWERED BY SATELLITE RECEIVER NO BATTERIES REQUIRED REPLACES TP65... |
