can divide a cable coming from a discriminator?
After combining the power cable and a diplexer antenna, using a splitter or kill him the signal?
You should be able to split the output. Note that no uncombined signal just allow multiple devices to use the combined signal. If the signal is very weak after the split, which can add an amplifier to the combiner and splitter. Hope this helps. Please go back and choose a better response from all those submitted.
|
|
Zenith ZDS-5004 Satellite Diplexer
$11.99 If you're already a satellite TV subscriber and you need to run a new cable through the walls for an additional cable connection, surveillance camera or other source, the Zenith ZDS-5004 Satellite Diplexer can save you a lot of time. The ZDS-5004 can send off-air television signals, cable TV or surveillance camera feeds to your TV using the same cable that already connects your satellite receiver ... |
|
|
DirecTv SWM 16 Channel Single Wire Multi-Switch
$49.99 Features * 16 Channel Single Wire Multi-switch (SWM) with 29V Remote Power Inserter (included) * Allows any transponder from any DIRECTV satellite input to be independently selected and distributed via one of eight designated SWM output frequency channels. * Provides eight (16) independent channels for supporting up to 16 DIRECTV satellite tuners. * Provides two outputs to serve two customer d... |
|
|
Cables To Go 41051 Economy Diplexer
$0.01 Combines and separates DBS satellite with off-air and cable television signals. Nickel-plated zinc die-cast housing with precision machined ports reduce interference and signal leakage. 360 degree insert pins provide maximum signal transfer maintaining a distortion free signal for digital transmission. Weather sealed ports resist moisture to 30PSI that can degrade picture quality and affect perfor... |
|
|
Cables to Go 41055 3x4 Satellite Multiswitch
$8.99 Add four satellite receivers to one dual LNB for more versatility from your satellite system. Inputs for two satellite signals and off-air antenna or cable television. Satellite and off-air signals are separated at the DSS receiver using a diplexer. This multi-switch is about half the size of a traditional multi-switch measuring only 4-1/2in x 3-1/2in. Low current consumption allows this multi-swi... |
|
|
Two Gigahertz Low-Loss RF Splitters for TV & Satellite MKII - 2 Way 2 GigaHertz RF Splitter
$24.95 Accurately separate high-bandwidth TV signals to multiple components with this Monster TGHZ-2RF Low-Loss RF splitter.... |
|
|
Brand New Directv SWM8 Single Wire Multiswitch Switch with Power Inserter 29V Supply PI29-Z Kit
$39.99 * 8 Channel Single Wire Multi-switch (SWM) w/Remote Power Inserter * Allows any transponder from any DIRECTV satellite input to be independently selected and distributed view one of eight designated SWM output frequency channels. * Provides two outputs to serve two customer dwellings (typical) * Contains a built-in diplexer for combining off-air signals with DirecTV satellite signals onto a sin... |
