How I can display an image (image) on multiple television screens?
I recently purchased a large box of CATV cable, terminals, tools, and distribution amplifiers in an auction, so I decided to experiment. I ran cable through my house, with amplifiers, each one of my 4 TVs. The signal, however, comes from the one in my bedroom, which is the only one that has a significant amount of video equipment connected to it. At the root end of the cable, put an RF modulator with a composite video input and S-video. I tested my system by connecting a VCR / DVD player to the composite video input. The signal appears and sounds great on every TV. Is there a way I can make an image appear on every TV screen? My player DVD does not have photo capabilities and I wanted a relatively high quality image. I have it on my computer, is a resolution of 1024×768. Is there any way that I can show with a composite or S-video, so you can see all of my TV at the same time?
Not that comes to mind without having to buy elsewhere. If your computer happens to have a composite video out, connect the modulator. I suppose you have done this … You could get a converter to adapt the output of the team composite video. probably cost about $ 100 to $ 200. There are a number of new topics (AV receiver, TV, TIVO, etc) coming to market, allowing images to be pulled from a team if they are connected to the same Ethernet. You can find an affordable piece that has this feature. Or maye just get a new DVD player that plays a disk image. Probably the least expensive option. Good luck!
JLX750 AMPLIFIER www.eltigre-catv.com
|
|
12dB VHF/CATV Signal Amplifier
*One source to one destination *50450MHz... |
|
|
On-Q Video Splitter Combiner, DC Passing, 1Ghz, Variation
... |
|
|
F Type 75 Ohm Terminator, Pkg/10
$0.99 "Also known as Dummy Loads, terminators are an essential component in the proper termination of unused outputs of line splitters and amplifiers which utilize a Type F interface. Available in packages of 10 pieces. This is L-com part number BTF75M."... |
|
|
Bi-Directional 2-Way 1Ghz Catv Drop Amplifier With Active Return - Dual Output, 11Db
$37.24 Forward bandwidth 54-1000MHz/reverse bandwidth 5-42MHz allows interactive revenue generating services11dB forward gain provides better carrier to noise separation for optimum system performance10dB reverse path gain ensures reverse path signals overcome home distribution losses for more reliable internet and media operation6KV surge protected on all ports to protect consumer equipment from transie... |
|
|
Electroline EDA FT08100 8-port TV Signal Booster/Amplifier with Active Return Path
$119.99 With the trend of more single family houses being built, Electroline introduces the Flat-Top amplifier to meet the expectation of having cable service in every room in the house. The EDA-FT 08100 Flat-Top is designed for large houses with a cable or off-air drop in every room. The flat top configuration keeps the wiring more compact and neater in both outdoor subscriber box or wall-mounted applica... |
|
|
Electroline EDA-2400 Four Port Cable TV HDTV Signal Booster/Amplifier (Retail Package)
$58.99 Maximize the performance of your cable distribution network with an Electroline EDA 2400 amplifier. The EDA 2400 is designed to boost an incoming CATV signal by 7 dB over 4 ports. Expect nothing but the highest quality signal combined with the most reliable performance. The EDA 2400 features an industry benchmark for low noise at 3 dB, and the extra surge protection (XSP) has been rated at the IEE... |
|
|
Electroline EDA 2100 1-port RF/CATV Amplifier
$45.99 Maximize the performance of your off-air/cable distribution network with an Electroline EDA 2100 amplifier. The single port EDA 2100 is designed to boost both analog and digital off-air signals, as well as CATV signal by 15 dB over a single port. Expect nothing but the highest quality signal combined with the most reliable performance. The EDA 2100 features an industry benchmark for low noise at 3... |
|
|
ABSOLUTE TUNER657 TV TUNER VIDEO BOOSTER
$86.99 4 Channel ANALOG TV / CATV Tuner with Remote Control and Diversified Antenna 2 Audio and Video Output 2 Audio and Video Input 12 Volts... |
|
|
38dB Bi-directional RF Amplifier
$373.90 The CVT-40BID is ideal for large apartment or multiple cable TV runs. The high gain RF amplifier covers all TV bands from 54-1000 MHz and a bi-directional 5-42 MHz return path is used for Pay-Per-View and other interactive TV services. It provides 40 dB of gain and has a variable tilt compensation for large CATV systems to be properly balanced. A variable input attenuator reduces the possibility o... |
|
|
Level control in CATV systems (Massachusetts Institute of Technology. Dept. of Electrical Engineering and Computer Science. Thesis. 1975. M.S)
... |
Tags: amplifier, best catv amplifier, bulk, cable, catv, catv amplifier bidirectional, catv amplifier circuit, catv amplifier reviews, catv amplifier schematic, catv amplifier splitter, catv amplifiers, digital catv amplifier, leviton catv amplifier, motorola catv amplifier, rf